Rivolta

B.W.R. 210 Phosphate-free

Low-foaming cleaning concentrate

Rivolta B.W.R. 210 phosphate-free is a degreasing concentrate that is gentle on materials, facilitates separation and produces minimal foam.

Benefits at a Glance

  • No phosphate residues
  • Low foaming
  • Easy to separate in accordance with ÖNORM B 5105/5106
  • Suitable for ultrafiltration
  • Contains corrosion inhibitors

Standard Packaging

  • 11 kg Canister Item No. 600452483
  • 20 kg Canister Item No. 601130328
  • 220 kg Drum Item No. 600452506

Applications & Material Compatibility

Rivolta B.W.R. 210 Phosphate-Free is suitable for removing oils, greases, cooling lubricants, soot and other contaminants from metals, plastics, rubber, ceramics and other alkali-resistant surfaces. Our low-foaming cleaning concentrate is chloride-free as per the formulation and, when diluted with deionised water, is suitable for use as a cleaning agent in chloride-sensitive areas, such as power stations. This largely minimises the risk of stress corrosion cracking caused by cleaning agents.

The degreasing concentrate is very economical, as it can be diluted with up to 50 parts water. The working dilution depends on the type of contamination, the degree of soiling and the type of cleaning process. Heating to up to +80 °C significantly increases the cleaning effectiveness.

Areas of application

Rivolta B.W.R. 210 Phosphate-free is particularly suitable for cleaning systems with moving parts, such as spray washers, oscillating immersion systems, jet cleaning apparatus, ultrasonic systems, steam jet equipment and cleaning tables, as well as for general-purpose applications in all conventional processes.

It is used for cleaning engines, generators, machinery and gearbox components, vehicle parts, bearings, repair parts, semi-finished products, floors and much more in power stations, energy supply facilities, industrial plants, workshops, vehicle fleets, sewage treatment works, etc.

Rivolta B.W.R. 210 Phosphate-Free is neutral towards plastics, rubber, ferrous metals and most paints. For aluminium, the concentration should not exceed 5% (1:20) (cold application only). Not suitable for zinc or galvanised parts.

You will find suitable application equipment and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: B.W.R. 210 Phosphate-free

Send Inquiry

Request product information: B.W.R. 210 Phosphate-free