Rivolta

F.L. 75

Synthetic Hydraulic and Transmission Oil

Rivolta F.L. 75 is formulated from synthetic base oils and carefully selected additives that meet the strict hygiene requirements of the food industry.

  • NSF Reg. No. 119522
  • ISO VG 46
  • Viscosity Index: > 140
  • Kinematic Viscosity at +40 °C: 46 mm²/s
  • Operating Temperature Range: -59 °C – +140 °C

Benefits at a Glance

  • NSF-H1 registered
  • High resistance to aging and oxidation
  • Good compatibility with seals
  • Odorless and tasteless
  • Fully synthetic
  • Good miscibility with mineral oils
  • Very good demulsibility
  • Low tendency to evaporate

Standard Packaging

  • 20 l Canister Item No. 601129704
  • 200 l Drum Item No. 600450779
  • 60 l Drum Item No. 600450762
  • 10 l Canister Item No. 600450748

Applications & Material Compatibility

Depending on their viscosity, the synthetic hydraulic and gear oils in the Rivolta F.L. series meet and exceed the HLP requirements for hydraulic oils as specified in DIN 51524 T2, as well as the CLP requirements per DIN 51517 T3 for gear oils, and demonstrate outstanding properties in terms of viscosity stability, wear protection, oxidation stability, and corrosion protection.

Applications

  • Hydraulic systems (hydraulic motors, hydraulic pumps)
  • Gearboxes (spur gears, bevel gears, helical-screw gears; e.g., worm gears)

Rivolta F.L. 75 is miscible with mineral oils and ester oils, but is not miscible with polyalkylene glycols.

Preparation of the Lubrication Point

Drain the old product. If the system was filled with a miscible product, no special flushing procedure is required before refilling. However, in accordance with
food safety regulations and to ensure product purity, we recommend flushing the system with the Rivolta F.L. hydraulic and gear oil to be used. If the system was filled with a non-miscible oil, a flushing procedure must be performed using the Rivolta F.L. 75 to be used before refilling.

You can find suitable application equipment and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: F.L. 75

Send Inquiry

Request product information: F.L. 75