S.B.H. 23
S.B.H. 23 - Image 2
S.B.H. 23 - Image 3
S.B.H. 23 - Image 4
Back
Rivolta

S.B.H. 23

Synthetic Biodegradable Hydraulic Oil

Rivolta S.B.H. 23 is a fully synthetic, readily biodegradable, high-performance hydraulic oil.

  • Density at +15 °C: 0.92 g/ml
  • ISO viscosity grade 46
  • Viscosity index > 190

Benefits at a Glance

  • Easily biodegradable
  • Minimal friction and wear
  • Wide operating temperature range
  • High viscosity index
  • Resistant to aging and oxidation
  • Good compatibility with seals
  • High proportion of renewable raw materials

Downloads

Standard Packaging

  • 20 l Canister Item No. 601129506
  • 10 l Canister Item No. 600448929
  • 200 l Drum Item No. 600448950
  • 60 l Drum Item No. 600448943

Applications & Material Compatibility

Rivolta S.B.H. 23 combines fully synthetic base oils with innovative additive technology to deliver a range of performance characteristics that far surpass those of conventional HLP and HVLP hydraulic oils. Our additive package enhances the already outstanding properties of our base oils with regard to aging, corrosion, and wear. Wear protection is of particular importance here. The lack of wear protection in conventional oils leads to increased wear at the contact zone between the “sealing element and metal surface.” This results in leaks and oil loss. The Rivolta S.B.H. series, with its special additive system, effectively prevents stick-slip and thus prevents leaks in the system.

Applications

For all types of hydraulic systems as well as hydraulic motors. The Rivolta S.B.H. series exceeds the requirements of DIN 51524 for hydraulic oils of the HLP and HVLP specifications, with the exception of DIN EN ISO 4236 (Tost test). Furthermore, it exceeds the requirements of DIN ISO 15380 for HEES oils.

Rivolta S.B.H. 23 is compatible with mineral oil-resistant sealing materials and is miscible with mineral oils and ester oils. Do not mix with polyalkylene glycol. When changing the oil, follow the conversion guidelines in accordance with DIN ISO 15380.

Preparation of the Lubrication Point

  • Before refilling with Rivolta S.B.H. 23, perform the following steps:
  • Drain the old product. If the system was filled with a miscible product, no special flushing procedure is required before refilling with S.B.H. 23. Full performance is achieved only when used unmixed.
    If the system was filled with a non-miscible oil, a flushing procedure with S.B.H. 23 must be performed before refilling.

You can find suitable application equipment and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Contact us now
Back

Other Products

Related products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Close

Send Inquiry

Request product information: S.B.H. 23
Close

Send Inquiry

Request product information: S.B.H. 23