Rivolta

O.C.X.

Oxide Remover

Rivolta O.C.X. is a cost-effective and highly effective cleaner for all types of contacts on which oxide and sulfide layers have formed.

Benefits at a Glance

  • Penetrates and dissolves stubborn oxide and sulfide layers, hardened oils and greases, as well as dust and metal abrasion
  • Reduces repair and maintenance costs
  • Highly economical
  • Non-conductive; does not cause leakage currents
  • Easy to use

Standard Packaging

  • 10 l Canister
  • 400 ml Spray Can

Applications & Material Compatibility

Rivolta O.C.X. dissolves even very hard oxide and sulfide layers, as well as resinified oils and greases, metal abrasion, etc. O.C.X. helps eliminate malfunctions caused by excessively high contact resistance and poor contact. Using O.C.X. can reduce the need for time-consuming disassembly of hard-to-reach contacts and other electrical components. Repairs and maintenance tasks that previously took a long time can now be completed quickly.

Applications

  • Electrical systems
  • Equipment and devices
  • High-frequency, low-voltage, or high-voltage technology
  • In manufacturing, repair, or service

Instructions for Use

When using the aerosol can, Rivolta O.C.X. is applied by spraying with a thin, targeted stream using the flexible spray tube. The bulk product can be applied, for example, with hand-held sprayers and/or electric spray guns. After spraying the surface to be cleaned with O.C.X., allow it to take effect for approximately 15 minutes. Then, completely remove the loosened oxide and sulfide layers by wiping with lint-free cloths and, for example, a product from the Rivolta S.L.X. series. The cleaning effect can be further enhanced by using our cleaning pads.

You can find suitable application equipment and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: O.C.X.

Send Inquiry

Request product information: O.C.X.