Rivolta

B.R.X. 611

Low-foaming degreasing concentrate

Rivolta B.R.X. 611 is a low-foaming, oil-separating degreasing concentrate developed for industrial use.

Benefits at a Glance

  • NSF-A1 registered
  • Low-foaming
  • Separation-friendly according to ÖNORM B 5105/5106
  • User-friendly
  • Corrosion-inhibiting

Standard Packaging

  • 11 kg Canister Item No. 600452308
  • 20 kg Canister Item No. 601130281
  • 220 kg Drum Item No. 600452322

Applications & Material Compatibility

Rivolta B.R.X. 611 is particularly suitable for cleaning systems such as spray washers, oscillating immersion systems, nozzle cleaning units, and ultrasonic cleaners. It can also be applied manually via immersion, spraying, or wiping. Its special active ingredients reliably remove greases, oils, cooling lubricants, soot, etc., from metals, plastics, rubber, ceramics, and other surfaces. B.R.X. 611 contains corrosion inhibitors that protect bare metal surfaces against flash rust for a short period.

For prolonged storage of cleaned parts, we recommend post-treatment with our Rivolta K.S.P. series corrosion protection products.

Areas of Application

Rivolta B.R.X. 611 is used in industry, trade and commercial businesses, municipal maintenance depots, vehicle fleets, and the public sector. B.R.X. 611 is NSF-A1 registered and suitable for use in the food and pharmaceutical industries.

Neutral towards plastics, rubber, ferrous metals, and most paints/coatings
For aluminum parts, the concentration should not exceed 2% (1:50) (cold application only)
Not suitable for non-ferrous metals, zinc, or galvanized parts

Application Instructions

Rivolta B.R.X. 611 is highly economical, as it can be diluted with up to 50 parts water. The mixing ratio depends on the type of contamination, the degree of soiling, and the cleaning method used. Heating the solution to up to +80°C significantly enhances cleaning performance.

Suitable application equipment and accessories can be found in our accessories section.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: B.R.X. 611

Send Inquiry

Request product information: B.R.X. 611