Due to its chemical composition, Rivolta B.R.X. 659 is particularly suitable for cleaning sensitive surfaces such as aluminium alloys. Its special
active ingredients reliably remove stubborn dirt – such as all types of hard-to-remove lubricants, caked-on oils, waxes, machining fluids, soot, etc. – whilst being gentle on the surface.
Our industrial heavy-duty cleaner contains corrosion inhibitors. Bare metal parts are protected against flash rust for a short period after cleaning. For longer-term preservation, we recommend a follow-up treatment with our Rivolta corrosion protection products from the K.S.P. range.
Rivolta B.R.X. 659 can be used across the entire industrial sector for cleaning engines, aluminium components, machine parts, gearbox parts, vehicle parts, bearings, repair parts, etc.
The cleaner is neutral towards ferrous metals, plastics and most paints.
Application instructions
Rivolta B.R.X. 659 can be diluted with up to 50 parts water for cost-effective use. The mixing ratio depends on the degree of soiling, the type of soiling and the cleaning method. Preheating to up to +80 °C significantly increases the cleaning effectiveness.
You will find suitable application equipment and accessories in our product range.
Do you need more information about our products or applications? Then just get in touch with us!
A1 Degreaser
Wet wipes
Anti-corrosion wax remover
Finish cleaner
Rivolta A.C.S. Spray is a cleaner that evaporates quickly and leaves no residue.
Cleaning concentrate
Directions to Bremer & Leguil
By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.
Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.
Directions to Bremer & Leguil
By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.
By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”
Directions to Bremer & Leguil
By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.
Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
