Synthetic Hydraulic and Transmission Oil, as well as Chain Lubricant
Rivolta F.L. 250 is composed of synthetic base oils and carefully selected additives that meet the strict hygiene requirements of the food industry.
H1: describes lubricants that may be used at critical points in the food industry where incidental, unplanned contact between the lubricant and the food cannot be fully ruled out.
Depending on their viscosity, the synthetic hydraulic and gear oils in the Rivolta F.L. series meet and exceed the HLP requirements for hydraulic oils as specified in DIN 51524 T2, as well as the CLP requirements per DIN 51517 T3 for gear oils, and exhibit outstanding properties in terms of viscosity stability, wear protection, oxidation stability, and corrosion protection. Furthermore, Rivolta F.L. 250 can be used as a high-performance chain lubricant in the food industry.
Applications
Our Rivolta F.L. lubricants do not attack common metals, plastics, paints, or mineral oil-resistant sealing materials. Rivolta F.L. 250 is miscible with mineral oils and ester oils, but is not miscible with polyalkylene glycols.
Preparation of the Lubrication Point
Drain the old lubricant. If the system was filled with a miscible product, no special flushing procedure is required before refilling. However, in accordance with
food safety regulations and to ensure product purity, we recommend flushing the system with the Rivolta F.L. hydraulic and gear oil to be used. If the system was filled with a non-miscible oil, a flushing procedure must be performed using the Rivolta F.L. 250 to be used before refilling.
When using the product as a chain lubricant, contaminants and old residues should be removed as thoroughly as possible. The friction points should be as dry as possible to achieve the full
adhesive strength of the products.
You can find suitable application equipment and accessories in our product range.
Do you need more information about our products or applications? Then just get in touch with us!
Synthetic chain lubricant for the food industry
Fully Synthetic IS Engine Oil
Cutting fluid
Cutting fluid
Multi-Temperature Range Grease
Fully Synthetic IS Engine Oil
Directions to Bremer & Leguil
By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.
Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.
Directions to Bremer & Leguil
By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.
By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”
Directions to Bremer & Leguil
By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.
Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from reCAPTCHA. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information
