Rivolta

F.L. 88N

Chain Lubricant

Rivolta F.L. 88 N is a fully synthetic, high-performance chain lubricant for the food industry.

  • NSF Reg. No.: 141608 / 150461 (Ae)
  • ISO VG 85/460
  • Viscosity Index: > 140
  • Kinematic Viscosity at +40 °C: 85 mm²/s
  • Operating Temperature Range: -35 °C – +140 °C

Benefits at a Glance

  • NSF H1 registered
  • Fully synthetic
  • Minimizes friction and wear
  • Excellent ageing and oxidation stability
  • Good penetrating and adhesive properties
  • Easy to apply

Standard Packaging

  • 10 l Canister Item No. 600701130
  • 200 l Drum
  • 400 ml Spray Can Item No. 600959661

Applications & Material Compatibility

The combination of high-quality, mineral-oil-free synthetic base oils with a powerful additive package gives Rivolta F.L. 88 N a performance profile far superior to that of conventional oils. The already outstanding properties of the base oils in terms of wear protection, ageing stability and corrosion protection are further enhanced by highly effective additives.

Applications

  • Chains: For internal bearing lubrication of highly loaded chains and for full lubrication in dusty environments. Suitable for lubricating conveyor, transport, control and drive chains in conveying systems, such as bottle and crate transport and distribution systems, slaughterhouse conveyor systems, bakery lines, etc.
  • Levers, pins, joints, guides, slideways, wire ropes, spindles and guide pulleys
  • Cleaning and lubricating: Rivolta F.L. 88 N penetrates deposits, displaces moisture, loosens rust and dirt and cleans components. It penetrates very effectively into tight clearances and forms a highly load-bearing lubricating film inside bearings.

Our Rivolta F.L. chain lubricants do not attack commonly used metals, plastics, paints or mineral-oil-resistant sealing materials. The lubricants are miscible and compatible with mineral oils.

Preparation of the Lubrication Point

Remove dirt and old residues as thoroughly as possible. Friction points should preferably be dry to ensure maximum adhesion of the products.

Suitable application equipment and accessories can be found in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: F.L. 88N

Send Inquiry

Request product information: F.L. 88N