IS X220 H
Back
VITROLIS

IS X220 H

Fully Synthetic IS Engine Oil

VITROLIS IS X220 H consists of a blend of complex synthetic base oils and high-quality additives that offer a significant improvement in performance compared to
commercially available I.S. lubricants.

  • Kinematic viscosity at +40°C: 220 mm²/s
  • Flash point: >250 °C
  • Pourpoint: -30 °C

Benefits at a Glance

  • Excellent viscosity stability
  • Effective Lubrication Performance
  • High Oxidation Stability
  • Excellent seal compatibility
  • Hoher Flammpunkt

Downloads

Standard Packaging

  • 190 kg Drum Item No. 601195112-1195115

Applications & Material Compatibility

The key advantages of VITROLIS IS X220 UV include its extremely low tendency to coke, high thermal stability, excellent lubricating properties, and superior protection against wear. VITROLIS IS X220 UV is formulated with a contrast agent.

Approvals & Recommendations

VITROLIS IS X220 UV exceeds the performance requirements of leading I.S. machine manufacturers and is listed in Heye International’s manufacturer recommendations. Key advantages of VITROLIS IS X220H include its extremely low tendency to coke, very high thermal stability, excellent lubricating properties, and superior protection against wear. In addition, thanks to its high flash point, VITROLIS IS X220H has a very low tendency to evaporate, thereby keeping the machine’s surroundings clean.

Areas of Application

VITROLIS IS X220H can be used in a wide range of temperatures, from very high to very low. It is particularly recommended for challenging lubrication applications where mineral oil-based lubricants do not perform adequately.

Advantages

  • Ausgezeichnete Viskositätsstabilität bei hohen und tiefen Temperaturen, dadurch optimale Schmierung in allen Temperatureinsatzbereichen.
  • Das bedeutet verlängerte Maschinenwartungsintervalle, höhere Produktionsraten und geringere Energiekosten.
  • Its superior load-bearing capacity improves effective lubrication performance, thereby significantly reducing mechanical wear. This helps prevent machine downtime and production losses.
  • Its exceptionally high oxidation stability reduces harmful coking residues and deposits. Lubricant failure and injector clogging are reduced. Premature wear, hose ruptures, fluid leaks, and the resulting potential fire hazards are prevented.
  • Reduziert durch den sehr hohen Viskositätsindex und die thermische Stabilität wesentlich den Schmierstoffverbrauch und spart dadurch Kosten. Verbessert die Umgebungshygiene und senkt die Abfallentsorgungskosten.
  • Excellent seal compatibility and hydrolytic stability.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Contact us now
Back

Other Products

Related products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Close

Send Inquiry

Request product information: IS X220 H
Close

Send Inquiry

Request product information: IS X220 H