Rivolta

S.K.D. 170

Synthetic Chain Adhesive Lubricant

Rivolta S.K.D. 170 is a high-performance adhesive lubricant.

  • Density at +15 °C: 0.94 g/cm³
  • Viscosity index: >140
  • Kinematic viscosity at +20 °C: 1500 mm²/s, at +40 °C: 430 mm²/s

Benefits at a Glance

  • Reliable, load-bearing lubricating film, even inside chains and cables
  • Fully synthetic; no resin buildup or sticking
  • Good adhesion at higher chain and cable speeds
  • Good water resistance
  • Very good corrosion protection
  • Very wide operating temperature range
  • Good temperature resistance
  • Reduces friction, wear, and energy consumption
  • Long lubricant service life

Standard Packaging

  • 200 l Drum Item No. 600449193
  • 10 l Canister Item No. 600449148
  • 400 ml Spray Can Item No. 600449100

Applications & Material Compatibility

Riolta S.K.D. 170 is formulated with fully synthetic, biodegradable base oils and contains additives that protect against wear, aging, and corrosion. This anti-seize lubricant reduces energy consumption, increases operational reliability, and extends the service life of machinery and equipment.

Applications

  • Chain lubrication: lifting and conveyor chains, forklifts, chains on tooling, production, and filling machines
  • Guides, slideways: on machine tools, punching dies, injection molding machines, production, conveyor, and filling systems
  • Levers, joints, bolts: in dusty environments and at high temperatures on machines, production systems, and vehicles
  • Spindles, idler pulleys: on machines and conveyor systems
  • Cable lubrication: all cables in indoor and industrial settings
  • Escalators and moving walkways

Rivolta S.K.D. 170 does not attack common metals, paints, or mineral oil-resistant sealing materials. The chain adhesive lubricant is miscible with and compatible with mineral oil.

Preparation of the Lubrication Point

Remove dirt and residues; if necessary, pre-treat the area several times at short intervals with Rivolta S.K.D. 16 N to loosen the residues. Then lubricate with Rivolta S.K.D. 170. The friction surfaces should be as dry as possible to achieve the product’s full adhesive strength.

Application Instructions

  • Spraying / Pouring: Position the spray can or oil can so that the lubricant can penetrate well between the friction surfaces
  • Brushing: Apply an even, thin coat with a clean brush, taking care not to introduce any dirt
  • Dipping: Soak components in an oil bath and allow them to drain
  • Centralized lubrication: Drip lubricators, oil spray systems, or oil mist systems

You can find suitable application equipment and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: S.K.D. 170

Send Inquiry

Request product information: S.K.D. 170