Rivolta

S.K.D. 320 N

Synthetic High-Temperature Chain Oil

Rivolta S.K.D. 320 N is a fully synthetic, temperature-stable, high-performance oil specially developed for chain lubrication.

Benefits at a Glance

  • Minimal evaporation losses and residue formation at high temperatures
  • High-load-bearing lubricating film
  • Good penetration into the interior of the chain
  • Very wide operating temperature range
  • Very good high-temperature resistance
  • Good adhesion
  • Optimal wear protection at high temperatures
  • Reduces energy consumption

Standard Packaging

  • 200 l Drum Item No. 602063885
  • 20 l Canister Item No. 602063878
  • 10 l Canister Item No. 602063861

Applications & Material Compatibility

Thanks to the minimal evaporation loss of Rivolta S.K.D. 320 N, consumption can be reduced and productivity increased. Our high-temperature chain oil leaves only minimal residues under high-temperature conditions. It reduces energy consumption and extends the service life of chains.

Applications

For the lubrication of drive and conveyor chains. Particularly in high-temperature environments, such as the hot end in the glass industry, paint dryers in the automotive industry, soldering systems, shrink tunnels in the packaging industry, tension frames, drying and fusing systems in the textile industry, and conveyor chains in circular conveyor systems, as well as ovens and drying systems in the wood, paper, and construction industries.

Rivolta S.K.D. 320 N does not attack common metals, paints, or mineral oil-resistant sealing materials. The chain oil is miscible with and compatible with mineral oil.

Preparation of the Lubrication Point

  • Remove dirt and old residues as thoroughly as possible.
  • Then lubricate with Rivolta S.K.D. 320 N. The friction points should be as dry as possible to achieve the product’s full adhesive strength.

Application Instructions

  • Oil can: Apply using an oil can to lubricate individual friction points
  • Brushes: Apply an even, thin coat with a clean brush. Take care to ensure no dirt is introduced
  • Immersion: Soak components in an oil bath and then allow them to drain
  • Centralized lubrication systems: Specifically designed for use in automatic lubrication systems

You can find suitable application equipment and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: S.K.D. 320 N

Send Inquiry

Request product information: S.K.D. 320 N