GREASE FC 2
Back
CASSIDA

GREASE FC 2

Synthetic high-temperature grease for extreme conditions in the food industry

CASSIDA GREASE FC 2 is a fully synthetic high-temperature grease that has been specially developed for lubricating bearings and seals exposed to extremely high temperatures or harsh environments in the food industry.

  • NSF Reg. No.: 144887
  • Kinetic viscosity at +40 °C: 510
  • DIN: KP FK 2 U-20
  • ISO: L-XDGHA 2

Benefits at a Glance

  • Excellent high- and low-temperature properties
  • Excellent resistance to cold and hot water, steam, and solvents
  • Excellent oxidative and mechanical stability
  • Good corrosion protection properties
  • Good adhesion properties
  • Odorless and tasteless
  • Excellent compatibility with elastomers and seals
  • Remains chemically inert when in contact with strong acids, bases, and halogens
  • Not compatible with other greases. All equipment components must be thoroughly cleaned before using
    CASSIDA GREASE FC.

Downloads

Standard Packaging

  • 1 kg Can Item No. 600822002
  • 800-gram cartridge Item No. 600821999

Applications & Material Compatibility

CASSIDA GREASE FC 2 is suitable for lifetime fillings. It consists of a highly stable synthetic thickener, synthetic base oils, and selected additives that meet the strict requirements of the food industry. Registered by the NSF (Class H1) for applications where incidental contact between the lubricant and food cannot be completely ruled out (lubricant with incidental food contact). Manufactured according to Bremer & Leguil quality standards in facilities where HACCP and GMP have been implemented and form an integral part of the quality and hygiene management systems in accordance with ISO 9001 and ISO 21469.

Scope of Application

  • Lubrication points with temperatures up to +260 °C. Short-term peaks of up to +270 °C are possible
  • Lubrication points that are exposed to corrosive chemicals and gases, such as carbonic acid, citric acid, and acetic acid; sodium hydroxide and potassium hydroxide; acidic and alkaline cleaners; bleach; etc.
  • Sliding and Rolling Bearings
  • Micro bearings, precision instruments
  • Joints, Guides, and Seals
  • Plastic and rubber components where excellent compatibility is required
  • Bearings and seals exposed to alcohols, ketones, and organic solvents

Operating temperature

  • Can be used for long-term and lifetime lubrication at temperatures ranging from -25 °C to +260 °C
  • Can be used up to +270 °C. Under these conditions, service life is reduced, and relubrication intervals must be adjusted to account for the specific conditions.
  • Never expose to temperatures above >+300 °C

Sealant and Paint Compatibility

Compatible with EPDM and mineral oil-resistant coatings, elastomers, and seals.

Solubility and Purification

CASSIDA GREASE FC is insoluble in water and mineral oil-based or other common organic solvents (hydrocarbons, alcohols, ethers, esters, etc.). It is soluble in fluorinated organic solvents. Perfluorooctane is recommended as a solvent for cleaning surfaces lubricated with CASSIDA GREASE FC.

 

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Contact us now
Back

Other Products

Related products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Close

Send Inquiry

Request product information: GREASE FC 2
Close

Send Inquiry

Request product information: GREASE FC 2