IS X150
Back
VITROLIS

IS X150

Fully Synthetic IS Engine Oil

VITROLIS IS X150 UV consists of a blend of complex synthetic base oils and high-quality additives that offer a significant improvement in performance compared to
commercially available I.S. lubricants.

  • kinematic Viscosity at +40°C: 148 mm²/s
  • Flash point: >200 °C
  • Pourpoint: -30 °C

Benefits at a Glance

  • Excellent viscosity stability
  • Effective Lubrication Performance
  • High Oxidation Stability
  • Excellent seal compatibility

Downloads

Standard Packaging

Applications & Material Compatibility

The key advantages of VITROLIS IS X150 include its extremely low tendency to coke, high thermal stability, excellent lubricating properties, and superior protection against wear.

Approvals & Recommendations

VITROLIS IS X150 exceeds the performance requirements of leading I.S. machine manufacturers, particularly the very stringent requirements of O.I. Nach Prüfung der technischen Eignung und der Leistungsfähigkeit empfiehlt O.I. VITROLIS IS X150 offiziell für den Einsatz in ihren I.S.-Maschinen. Approval has also been received from the machine manufacturer, BOTTERO.

Advantages

  • Ausgezeichnete Viskositätsstabilität bei hohen und tiefen Temperaturen, dadurch optimale Schmierung in allen Temperatureinsatzbereichen. This means longer machine maintenance intervals, higher production rates, and lower energy costs.
  • Its superior load-bearing capacity improves effective lubrication performance, thereby significantly reducing mechanical wear. Machine downtime and production losses are avoided.
  • Its exceptionally high oxidation stability reduces harmful coking residues and deposits. Schmierstoffausfall und Injektor-Verstopfungen werden reduziert. Premature wear, pipe breaks, fluid leaks, and the resulting potential fire hazards are prevented.
  • Highly recommended for challenging lubrication conditions where mineral-oil-based lubricants do not perform adequately.
  • Thanks to its naturally high viscosity index and thermal stability, it significantly reduces lubricant consumption, thereby saving costs; at the same time, it reduces water pollution, improves environmental hygiene, and lowers waste disposal costs.
  • Excellent seal compatibility and hydrolytic stability.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Contact us now
Back

Other Products

Related products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Close

Send Inquiry

Request product information: IS X150
Close

Send Inquiry

Request product information: IS X150