Multi-Temperature Range Grease
Rivolta F.L.G. GT-4 is a fully synthetic, high-performance lubricant for the food, pharmaceutical, and animal feed industries.
H1: describes lubricants that may be used at critical points in the food industry where incidental, unplanned contact between the lubricant and the food cannot be fully ruled out.
Rivolta F.L.G. GT-4 is a walk-stable, extremely water-resistant, high-temperature-resistant synthetic grease designed for heavily loaded rolling and plain bearings as well as guides within a
very wide operating temperature range.
Applications
Rolling bearings:
Plain Bearings:
Bearings and guides operating at low sliding speeds and high contact pressures.
Bevel gears and racks subjected to high shock loads and media exposure.
For lubricating bolts, joints, cam discs, and other sliding surfaces.
Our multi-temperature-range greases do not attack common metals, plastics, paints, or mineral oil-resistant seals. They should not be mixed with other greases.
Preparing the Lubrication Point
Remove as much dirt and old residue as possible.
You can find suitable application equipment and accessories in our product range.
Do you need more information about our products or applications? Then just get in touch with us!
Mold Lubricant
Fully Synthetic IS Engine Oil
Fully Synthetic IS Engine Oil
Mold Lubricant
Synthetic high-temperature grease for extreme conditions in the food industry
Oil blend for the manufacture of ampoules
Directions to Bremer & Leguil
By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.
Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.
Directions to Bremer & Leguil
By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.
By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”
Directions to Bremer & Leguil
By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.
Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information
