Rivolta

P.H.C.

Photovoltaic cleaner

Rivolta P.H.C. is a gentle on materials, highly efficient and biodegradable cleaning concentrate designed to remove dirt from photovoltaic systems.

Benefits at a Glance

  • Material compatibility tested by the Fraunhofer CSP Institute
  • Biodegradable
  • Highly concentrated formula
  • Excellent cleaning performance
  • Reduces re-soiling
  • Not subject to labelling requirements under CLP

Standard Packaging

  • 10 l Canister Item No. 602093257
  • 20 kg Canister Item No. 602172594

Applications & Material Compatibility

The Rivolta P.H.C. photovoltaic cleaner is based on a combination of special active ingredients, each of which gently removes various residues and contaminants – such as dust, pollen, soot, bird droppings, green deposits, road grime and other environmental deposits – from PV modules. Rivolta P.H.C. is supplied exclusively as a concentrate and must be diluted with water before use. The concentration used depends on the cleaning method and the degree of soiling on the modules to be cleaned.

Areas of application

Rivolta P.H.C. is equally suitable for use in solar parks, across industry as a whole, in agriculture, etc., for the gentle and efficient cleaning of photovoltaic systems.

Material compatibility

Extensive material compatibility tests were carried out on Rivolta P.H.C. by the Fraunhofer CSP Institute to analyse potential risks to PV modules when exposed to the cleaning agent. The following components of standard PV modules were tested:

  • Aluminium frames with an anodised coating
  • Silicone edge sealant and
  • Rolled PV glass with anti-reflective coating

Result:

The typical service life of photovoltaic systems is around 25 years. Based on the results of the study, it can therefore be concluded that, over the entire service life – assuming an annual cleaning cycle, a maximum wetting time of one hour per cleaning operation, and use of the cleaner at its maximum application concentration (1:4) – no impairment of the tested functionalities of the photovoltaic modules is to be expected as a result of chemical interactions caused by contact with Rivolta P.H.C.

Application instructions

Rivolta P.H.C. is suitable for large-area cleaning using brushes / abseil brushes, cleaning robots and all standard roller brush systems. For small PV modules, it can also be applied manually using a spray-and-rinse method with a pressure pump sprayer fitted with a foam nozzle. Rinse with clean water if necessary.

You will find suitable application equipment and accessories in our product range.

 

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: P.H.C.

Send Inquiry

Request product information: P.H.C.