F.L.G. GT-4
F.L.G. GT-4 - Image 2
F.L.G. GT-4 - Image 3
F.L.G. GT-4 - Image 4
Back
Rivolta

F.L.G. GT-4

Multi-Temperature Range Grease

Rivolta F.L.G. GT-4 is a fully synthetic, high-performance lubricant for the food, pharmaceutical, and animal feed industries.

  • NSF Reg. No.: 143102
  • NLGI Class: 2
  • Base oil viscosity at +40 °C: 400 mm²/s
  • DIN KP HC 2 R-30
  • ISO L-XDFIB 2
  • Operating temperature range: -35 °C – +180 °C

Benefits at a Glance

  • NSF-H1 registered
  • Resistant to aging and oxidation
  • Excellent lubricating properties
  • Very good water resistance
  • High thermal stability
  • Wide operating temperature range
  • Good pumpability at low temperatures (FLG GT-2)
  • Excellent corrosion protection
  • Minimal friction and wear

Downloads

Standard Packaging

  • 1 kg Can Item No. 600716554
  • 10 kg Hobbock Item No. 600716561
  • 25 kg Hobbock Item No. 600716578
  • 500 g Cartridge Item No. 600748876

Applications & Material Compatibility

Rivolta F.L.G. GT-4 is a walk-stable, extremely water-resistant, high-temperature-resistant synthetic grease designed for heavily loaded rolling and plain bearings as well as guides within a
very wide operating temperature range.

Applications

Rolling bearings:

  • Heavy-duty, slow- to medium-speed rolling bearings operating at very high temperatures, such as bearings in automatic baking machines and drying ovens
  • Bearings subjected to high impact loads, such as those in pellet presses
  • Support and guide roller bearings in conveyor systems, dryers, and ovens

Plain Bearings:

  • For plain bearings exposed to high temperatures

Bearings and guides operating at low sliding speeds and high contact pressures.

Bevel gears and racks subjected to high shock loads and media exposure.

For lubricating bolts, joints, cam discs, and other sliding surfaces.

Our multi-temperature-range greases do not attack common metals, plastics, paints, or mineral oil-resistant seals. They should not be mixed with other greases.

Preparing the Lubrication Point

Remove as much dirt and old residue as possible.

You can find suitable application equipment and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Contact us now
Back

Other Products

Related products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Close

Send Inquiry

Request product information: F.L.G. GT-4
Close

Send Inquiry

Request product information: F.L.G. GT-4