Rivolta

S.K.D. 3400

High-Pressure Anti-Seize Lubricant

Rivolta S.K.D. 3400 is an extremely knead-stable, water-resistant, and heat-resistant semi-synthetic grease of medium consistency designed for the highest pressure loads.

Benefits at a Glance

  • Extremely stable under walking conditions, resistant to aging
  • Very high load-bearing capacity
  • Colloidally finely dispersed solid lubricants
  • Resistant to dirt, water, and weathering
  • Absorbs shocks and vibrations
  • Very good corrosion protection

Standard Packaging

  • 25 kg Hobbock Item No. 600449537
  • 10 kg Hobbock Item No. 600449513
  • 400 ml Spray Can Item No. 600449476

Applications & Material Compatibility

Rivolta S.L.D. 3400 is highly suitable for lubricating open friction points exposed to the elements or dust, and provides excellent corrosion protection. This extreme-pressure adhesive lubricant is an ideal long-term lubricant that reduces maintenance requirements by extending relubrication intervals.

Applications

  • Open gearboxes: heavily loaded gearboxes subjected to shock or vibration, heavy dust accumulation, and extreme weather conditions, e.g., rock crushers, excavators, cranes
  • Gears, gear rims, rack gears: in production and transport systems, dam structures, containers, and crane systems
  • Bolts, levers, joints: under very low sliding speeds, high contact pressures, and severe weather conditions, e.g., on excavators, cranes, and locks
  • Slideways, guide rails: under very high contact pressures and low sliding speeds
  • Rolling and plain bearings: large-dimensioned, slow-moving bearings subjected to very high shock loads, e.g., bearings on rock crushers, lime mills
  • Steel cables: Lubrication and corrosion protection for hoisting, conveyor, and support cables

Rivolta S.K.D. 3400 does not attack common metals, mineral oil-resistant plastics, paints, or seals. The product should not be mixed with other greases.

Preparation of the Lubrication Point

Ensure the surface is clean and free of contaminants; remove dirt and lubricant residues.

Application Instructions

  • Aerosol cans: Spray the contact surface evenly from a distance of approximately 15 to 20 cm. After about 10 minutes, a fully load-bearing, adhesive lubricating film forms.
  • Bulk product: Apply evenly with a putty knife or stiff brush. Take care to ensure that no dirt is introduced.

You can find suitable application tools and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: S.K.D. 3400

Send Inquiry

Request product information: S.K.D. 3400