Rivolta

K.S.P. 440 nonVOC

VOC-Free Anti-Corrosion Wax

Rivolta K.S.P. 440 nonVOC is a water-free, wax-based, full-solid, long-term anti-corrosion coating.

Benefits at a Glance

  • Reliable, long-term corrosion protection
  • Non-slip protective film
  • VOC-free in accordance with the 31st BImSchV
  • Flash point +135 °C
  • Temperature resistance (dry film): -40 °C to +100 °C
  • Silicone-free
  • Solvent-free
  • Good material compatibility
  • Easy and cost-effective application

Standard Packaging

  • 10 kg Hobbock Item No. 600891343

Applications & Material Compatibility

Rivolta K.S.P. 440 nunVOC is solvent-free and therefore VOC-free in accordance with the 31st BImSchV (VOC Ordinance). It forms a durable protective film that exhibits excellent adhesion to steel, zinc, as well as galvanized and phosphated surfaces, and many others. K.S.P. 440 nonVOC is drip-free and run-resistant while still offering good flow properties. This unique property of K.S.P. 440 nonVOC—its shear-thickening consistency—prevents or reduces dripping and sagging of the protective film when applying coat thicknesses of up to 100 μm.

At the same time, thanks to its creep properties, K.S.P. 440 nonVOC can penetrate into gaps and undercuts, protecting them from corrosion. K.S.P. 440 nonVOC contains additional inhibitors that prevent rust formation beneath the wax layer in the event of minor damage to the wax layer. Using Rivolta K.S.P. 440 nonVOC can reduce material consumption by 30% to 70% compared to solvent- and water-based waxes, while maintaining the same dry film thickness.

Applications

  • Cavity preservation on vehicles, crane booms, machine frames, etc.
  • Long-term preservation, particularly of cavities and interior areas of machines, equipment, and components of all kinds
  • Applications where VOC-free, wax-based long-term corrosion inhibitors are required for extreme conditions, such as maritime transport, outdoor exposure, etc.
  • All types of components where short drying times are not required

Application Instructions

The surfaces to be protected should be dry and clean before applying Rivolta K.S.P. 440 nonVOC. Our product can be applied at room temperature using standard compressed-air spray systems; application with a brush, roller, etc., is also possible. K.S.P. 440 nonVOC dries at ambient temperature, even in cavities. After prolonged storage, the product should be stirred briefly to ensure even distribution of the finest wax particles it contains.

If Rivolta K.S.P. 440 nonVOC needs to be removed, this can be done quickly and easily using, for example, the hydrocarbon-based products from the Rivolta M.T.X. series.

You can find suitable application equipment and accessories in our product range.

Do you have any questions?

Do you need more information about our products or applications? Then just get in touch with us!

Other Products

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Directions to the Bremer & Leguil GmbH Administrative Office

Directions to Bremer & Leguil

By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.

By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”

Directions to Bremer & Leguil GmbH Production/Warehouse

Directions to Bremer & Leguil

By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.

Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.

Send Inquiry

Request product information: K.S.P. 440 nonVOC

Send Inquiry

Request product information: K.S.P. 440 nonVOC