Silicone Oil / Spray
Rivolta S.I.L. Spray is a multifunctional silicone lubricant. It can be used to lubricate metal-to-plastic, plastic-to-plastic, rubber-to-rubber, and metal-to-paper contact surfaces.
H1: describes lubricants that may be used at critical points in the food industry where incidental, unplanned contact between the lubricant and the food cannot be fully ruled out.
3H: describes lubricants used as release agents where intentional contact with the food is desired or technically necessary, e.g. to prevent the end product from sticking during processing.
Our silicone oil leaves a thin, non-intrusive film on the treated surface that improves its lubricity. The silicone film is colorless and odorless, heat- and cold-resistant, and antistatic. Rivolta S.I.L. Spray is a multifunctional silicone spray for treating metal-to-plastic, plastic-to-plastic, and rubber-to-rubber sliding pairs. The product forms a non-interfering film on the treated surface that improves sliding properties, prevents sticking, and protects against corrosion and contamination. The silicone film is colorless and odorless, heat- and cold-resistant, and antistatic.
Applications
You can find suitable application equipment and accessories in our product range.
Do you need more information about our products or applications? Then just get in touch with us!
Oil blend for the manufacture of ampoules
Cutting fluid
Silicone Grease
Mold Lubricant
Gear oil for the food industry
Hydraulic oil for the food industry
Directions to Bremer & Leguil
By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.
Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.
Directions to Bremer & Leguil
By train
Bremer & Leguil is a 10-minute walk from the train station. From the main exit, cross the station forecourt and turn right onto Mercatorstraße. Then turn left onto Königsstraße (pedestrian zone). At the “Lifesaver” fountain, turn right onto Am Burgacker. After crossing at the traffic lights, Bremer & Leguil is 50 meters further on the right-hand side.
By car
From Düsseldorf:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road. At the next traffic light, turn right onto Landfermannstraße. Follow the road and, after the third traffic light, turn right onto “Am Burgacker.”
From Dinslaken:
Take Exit 10 (DU-Duissern) off the A59. Turn right and follow the road until you reach the third street on the left. Turn onto Moselstraße there. At the next intersection, turn right onto Fuldastraße. After about 100 meters, turn left onto “Am Burgacker.”
Directions to Bremer & Leguil
By car
Take Exit 13 (DU-Wanheimerort) off the A59. If you’re coming from Duisburg, turn right. If you’re coming from Düsseldorf, turn left. You are now on Wacholderstraße; follow this street. At the second traffic light, turn left onto Düsseldorfer Straße. Follow the road for about 1.5 km. At the traffic light, turn right onto Neuenhofstraße. Continue straight through the next intersection. After about 300 meters, you’ll see the Bremer & Leguil warehouse at number 101 on the left.
Note on entering the address into your navigation system:
Please enter “Neuenhofstraße 90” into your navigation system, as the correct house number, 101, leads to a gated entrance.
You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More Information